Yokogawa FS20 Fittings for pH and ORP - Manual (Page 14)

IM 12B6K1-01E-E
RECOMMENDED ELECTRODES
1
)
TYPE DESCRIPTION
SR20-AC32 Reference electrode
SC29-PTC54
2
) Combined redox/ref. electrode
1
) For specifications of the electrodes see GS 12B6J1
2
) Atmospheric conditions only
PARTS AND ACCESSORIES
ORDER NR.
DESCRIPTION
K1500HC Set rubber ring (10x)
K1500GE Set O-rings (5x) for BELLOMATIC electrode
K1500GF 250 ml KCI-solution (1 m.)
K1520VA 250 ml KCI-solution (3,3 m.)
K1500GG 250 ml KCI-solution (1 m.) thickend
K1520VN 250 ml KCI-solution, (3,3 m.) thickend
4-3. Mounting kit for sterilisable
applications (Model FP20-S14)
To assure sterilisable applications and a
constant flow of electrolyte this mounting kit
can be used for fixing combined electrodes
with a large KCI-reservoir (see fig. 4-2).
For pressurising the system there is a 1/8”
nipple for connecting to each standard
pump. The pressure inside the holder may
never exceed the specifications of the
electrodes. See GS 12B6J1 for these
specifications.
ELECTRODES TO BE USED1)
TYPE
DESCRIPTION
SC21-AAC54 Combined pH/ref.
electrode
SC29-PTC54 Combined redox/ref.
electrode
1) For specifications see general
specifications sheet GS 12B6J1.
PARTS AND ACCESSORIES
ORDER NR.
DESCRIPTION
K1500GS Set O-rings
K1520VN 250 ml KCI-solution,
(3,3 m.) thickend
Figure 4-2
Tape
Electrode
O-rings (11x3)
(K1500BZ)
O-rings
(K1500GS)
12