Tract 810, Matic 450, Delivery – Yokogawa Pneumatic Retractables RF20H User Manual

Page 5

Advertising
background image

IM 12B06K06-E-E

5

5. Installation of the RF20M

(EXmatic 450)

Connect the tubing for the supply air at the lower
surface of the RF20M (EXmatic 450) (A).
- Pneumatics tube = 6mm
- Air filtered (40 μm), water and oil-free

only operate with compressed air

Attach the multi-hose at the lower surface of the
RF20M (EXmatic 450) (B).

The pneumatics hoses are connected

to the RF20M (EXmatic 450) as follows.

ø 6mm blue = ø = 6mm blue
ø 6mm black = ø = 6mm black
ø 6mm red = ø = 6mm red
ø 6mm green = ø = 6mm green
ø 6mm yellow = ø = 6mm yellow
ø 4mm Blue = ø = 6mm blue
ø 4mm black = ø = 6mm black

Attach the pneumatics hoses at the

retractable fitting as follows

At the armature
Hose ø = 6mm black in connection 1 (black) for

control air "measure".

Hose ø = 4mm black in connection 3 (black) for

feedback "measure".

Hose ø = 6mm blue in connection 2 (blue) for

control air "service"

Hose ø= 4mm blue in connection 4 (blue) for

feedback "service"

At the valves
Hose ø = 6mm red at the drain valve
Hose ø = 6mm yellow at the rinsing liquid valve 1
Hose ø = 6mm green at the rinsing liquid valve 2

A

B

4. Delivery

4.1 Delivery scope

The control unit is inspected in the factory and
delivered ready for installation in a packaging which
optimally protects the control.
The delivery consists of:
• control unit RF20M (EXmatic 450)
• key for control cabinet
• operating instructions

Depending on the version you have ordered, you
also receive:
• Multi hose (installed)
• mounting angle for multi hose (installed)

Keep the control unit in the packaging. There, it is
protected best until being assembled.

4.2 Delivery inspection

Before releasing the control unit for
assembly, you must ensure that:

• packaging and unit are in an impeccable

condition.

• the identification plate of the control unit

corresponds to the data in the order form.

Figure 5: Identification plate
The identification plate is affixed to the inside of the
cabinet door!

In case of questions, please contact Yokogawa.

CAUTION!

DANGER!

WARNING!

EX

tract 810

4404-FPM-255-D50-G14-PN
SN: 8000008
P:16 bar T:140ºC

made in germany

www.e-p-e.com

EX

matic 450

GF-1-105-EX
SN: 4071887.04
P:4-6 bar T:50ºC

made in germany

www.e-p-e.com

CAUTION!

DANGER!

WARNING!

Advertising