Yokogawa FU20F - Manual (Page 21)

IM 12B6J3-04E-E
21
9. EU DECLARATION OF CONFORMITY
EU DECLARATION OF CONFORMITY
We: Yokogawa Europe B.V.
Euroweg 2
3825 HD Amersfoort
The Netherlands
herewith declare under our sole responsibility that the product, model: FU20F
further specified with model suffix- and option codes: As listed in Annex-1 in this document
is manufactured in accordance with the requirements for CE-marking of products as stated in EC Decision:
768/2008/EC on a common framework for the marketing of products
by applying the following standards:
EN-ISO 9001: 2008 Quality management systems - Requirements
Subject product is:
• In compliance with the essential requirements of the specific product legislation:
- EMC Directive 2004/108/EC
by applying the following standards:
EN 61326-1: 2005 Electrical equipment for measurement, control and laboratory use
– EMC requirements – Part 1: General requirements.
Emission Class A, control and laboratory use
Immunity For use in industrial locations
- LVD Directive 2006/95/EC
by applying the following standards:
EN 61010-1: 2010 Safety requirements for electrical equipment for measurement,
control and laboratory use – Part 1: General requirements.
- Pressure Equipment Directive 97/23/EC (PED)
As amended by Regulation (EC) no. 1882/2003, by applying:
Article 3.3: Sound Engineering Practice
- Potentially explosive atmospheres (ATEX) Directive 94/9/EC
As amended by Regulation (EC) no. 1882/2003
by applying the following standards:
EN 60079-0: 2009 Explosive atmospheres – Part 0: Equipment – General requirements
EN 60079-11: 2007 Explosive atmospheres – Part 11: Equipment protection by intrinsic safety “i”
EN 60079-26: 2007 Explosive atmospheres – Part 26: Equipment with equipment protection
level (EPL) Ga
The provisions fulfilled are: 0 II 1 G Ex ia IIC T3...T6 Ga
Number of the EC-type Examination Certificate: DEKRA 11 ATEX 0064 X
Name of the notified body: DEKRA Certification B.V.
Identification number of the notified body: 0344
Address of the notified body: Utrechtseweg 310, 6812 AR Arnhem, The Netherlands
• Produced according to appropriate quality control procedures.
The CE-mark has been affixed on the product in 2012 for the first time.
Amersfoort, 1 April 2012
H. Leijten
General Manager
Yokogawa Process Analyzers (YPA)
Yokogawa Europe B.V.
EU DECLARATION OF CONFORMITY
We: Yokogawa Europe B.V.
Euroweg 2
3825 HD Amersfoort
The Netherlands
herewith declare under our sole responsibility that the product, model: FU20F
further specified with model suffix- and option codes: As listed in Annex-1 in this document
is manufactured in accordance with the requirements for CE-marking of products as stated in EC Decision:
768/2008/EC on a common framework for the marketing of products
by applying the following standards:
EN-ISO 9001: 2008 Quality management systems - Requirements
Subject product is:
• In compliance with the essential requirements of the specific product legislation:
- EMC Directive 2004/108/EC
by applying the following standards:
EN 61326-1: 2005 Electrical equipment for measurement, control and laboratory use
– EMC requirements – Part 1: General requirements.
Emission Class A, control and laboratory use
Immunity For use in industrial locations
- LVD Directive 2006/95/EC
by applying the following standards:
EN 61010-1: 2010 Safety requirements for electrical equipment for measurement,
control and laboratory use – Part 1: General requirements.
- Pressure Equipment Directive 97/23/EC (PED)
As amended by Regulation (EC) no. 1882/2003, by applying:
Article 3.3: Sound Engineering Practice
- Potentially explosive atmospheres (ATEX) Directive 94/9/EC
As amended by Regulation (EC) no. 1882/2003
by applying the following standards:
EN 60079-0: 2009 Explosive atmospheres – Part 0: Equipment – General requirements
EN 60079-11: 2007 Explosive atmospheres – Part 11: Equipment protection by intrinsic safety “i”
EN 60079-26: 2007 Explosive atmospheres – Part 26: Equipment with equipment protection
level (EPL) Ga
The provisions fulfilled are: 0 II 1 G Ex ia IIC T3...T6 Ga
Number of the EC-type Examination Certificate: DEKRA 11 ATEX 0064 X
Name of the notified body: DEKRA Certification B.V.
Identification number of the notified body: 0344
Address of the notified body: Utrechtseweg 310, 6812 AR Arnhem, The Netherlands
• Produced according to appropriate quality control procedures.
The CE-mark has been affixed on the product in 2012 for the first time.
Amersfoort, 1 April 2012
H. Leijten
General Manager
Yokogawa Process Analyzers (YPA)
Yokogawa Europe B.V.