Yokogawa DAQWORX - Manual (Page 5)

iv IM WX83-01E
Overview of This Manual
Structure of This Manual
This manual consists of three chapters and an index as shown below.
Chapter Title Description
1 Before Using the Software Gives an overview of the AddObserver Runtime.
Also provides a list of PC system requirements
and instructions for installing the software.
2 Monitoring with AddObserver
Panel
Explains how to use a panel to monitor
measured data, how to configure label displays,
and how to display trend graphs.
3 Responding to Error Messages Lists each error message and their corrective
actions, and explains how to check the version
of the AddObserver Panel.
Index An alphabetical index.
Scope of This Manual
This manual does not explain the basic operations of your PC's operating system (OS).
For specific information on your operating system please refer to the user's guide that
came with it.
Conventions Used in This Manual
• Units
K: Denotes 1024. Example: 100 KB
M: Denotes 1024 K. Example: 10 MB
G: Denotes 1024 M. Example: 2 GB
• Bolded Items
Items set in boldface mainly refer to on-screen interface elements such as menus,
commands, dialog boxes, and buttons, or keys on the keyboard.
• Headings Used for Descriptions of Operations
The following headings are used to distinguish procedural instructions from other
information given in chapters 1 through 3.
Procedure
This subsection contains the operating procedure used to carry out
the function described in the current section. All procedures are
written with inexperienced users in mind; experienced users may
not need to carry out all the steps.
Note Calls attention to information that is important for proper operation
of the instrument.