MAHLE RTI TX200-UNDP - Manual (Page 12)

Page 11
CONDENSER MAINTENANCE
Clean the Condenser to maintain high efficiency performance of the TX200. Disconnect power and remove the
Cover. Blow compressed air through the cooling fins of the Condenser to remove any debris.
Replace the Cover before applying power to the TX200.
EDF FILTER REPLACEMENT
Replace the EDF Filter according to the following:
Automotive After every 100 Jobs
Commercial After every Job Involving a Compressor Burn-out
After every 20 Jobs Involving Normal Service
Refer to the Accessory Parts List at the end of this manual for ordering information.