PreSonus FaderPort - Manual (Page 11)

OPERATION
9 | P r e S o n u s 2 0 0 8
2.2 INDIVIDUAL DAW CONFIGURATION INSTRUCTIONS
2.2.1 Cubase/Nuendo Native Setup
Once you have installed the FaderPort drivers and connected your FaderPort, launch Cubase or Nuendo to set-up
the FaderPort as a native control device
1. Go to Devices | Device Setup
2. In the Setup window, click on the “+” sign in the
top left corner and select “PreSonus FaderPort”
from the list of control surfaces
3. In the FaderPort Configuration menu to the right,
set both the MIDI Input and the MIDI Output to
“USB Audio Device” (PC) or “PreSonus
FaderPort (Mac)
4. Click “Apply” and then “OK”. Your FaderPort is
now ready to use