Nexo NXAMP - Manual (Page 33)

ENGLISH
PAGE
33
NOTA DE APLICACIÓN: ENVÍO AL SUB DESDE AUXILIAR
NX242 MANUAL DEL USUARIO LOAD2_45
FECHA: 15/10/2008
ESPAÑOL
ESPECIFICACIONES TÉCNICAS
ESPECIFICACIONES Procesador digital NX242 TDcontroller
Nivel de salida +28 dBu Max. con 600 Ohms carga
Rango Dinámico Todos los canales = 110dB
THD + Ruido Typical 0.005% flat setup (Max 0.01%@1000Hz@ 28dBu)
Tiempo de Latencia 2.2ms on a flat setup
Fuente de alimentación 115-230 Volts 50-60Hz continuous operation (operating range 90-264V)
CARACTERÍSTICAS
Entradas de Audio Dos entradas L&R Heavy Duty Audio, conversores de 24bit; Electronically balanced and
floating, 20kOhm. CMMR=80dB. Dos conectores XLR 3.
Entradas Sense 4 Amplifier Sense Inputs (LF mono, MF/HF L&R),Floating 150 k Ω. 18 bit converters. 8
Pole Removable Strip Terminal.
Salidas de Audio 4 Audio Outputs. 24 bit converters,Electronically balanced, 50 Ohms, 4 XLR-3M
connectors
Procesado 24 bit data with 48-bit accumulator. 100MIPS, NXtension Expander Board 100MIPS
opcional
Panel Frontal
Menu A and Menu B buttons.16 characters by 2 lines display. Select Wheel & Enter
button (). IN Clip – DSP Clip red LED’s Speaker Protection yellow LED for each
channel. Individual Mute/Solo buttons and red LED for each channel. Amp. Sense & Peak
(green & red) LED’s for each channel
Panel Trasero On/Off Mains switch; mains IEC socket; RS232 serial communications connector;
Expansion slot for processor extension card.
Memoria FLASH Upgrade for software improvement, new cabinet set-ups available on NEXO web site
www.nexo.fr
Dimensiones y Peso 1U 19" Rack - 230 mm (9") Depth.
3.8kg (8.8lbs) net
User Controls
Selección del sistema Allows control from all NEXO ranges.
Configuración del sistema
Within the selected range, allows the cabinet to be set for passive or active mode,
aux,mono or stereo subs, wedge or FOH operations depending on system selected. Up to
80 factory pre-sets.
Protección
Peak Limiter, Displacement and Temperature protection on every channel; Physio control
of the Protection limiter & compressors Soft Clip Automatic tracking of amplifier clip point.
Retardos Up to 150m (465 ft.) of delay in 10cm (.4in ) steps; on Sub channel, Main channels or Sub
+ Main linked
Headroom Allows to adjustment the input sensitivity while keeping an overall unity gain
Ganancia de Salida Ganancia Global e inter-canal de 6dB en pasos de 0.5dB.
Lectura Ganancia del Amplificador Permite comprobar la ganancia del amplificador a través de programa
Mute/Solo Changes front panel buttons from Channel Mute to Solo
Save/Recall Set-up Stores up to 10 user set-ups; On- the-fly recall, without mute or glitches for instant
comparison.
Array EQ LF or HF shelving filter to compensate ground or stacking effects, +/-6dB, frequency
factory tuned.
Security Mode Password protegido en modo de “Sólo Lectura”.
Certificados CE mark (EN 60065-1998, EN55103-1996), cULus approved ( UL60065) , FCC part15 compliant, CB
scheme