ReadyLIFT Z-71 GMC Sierra 1500 SST Lift Kit, 2007-2013, 4WD, 2.25F/1.75"R w/ Uniball Control Arms" - Manual (Page 8)

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-3488
8
Revised Feb-2014
Re-install the rear cross member as original. Install ReadyLIFT® Uni-Ball Control Arm.
Place the new strut extension spacer onto the strut. Install the strut with top spacer. Do not tighten yet.
38. 37.
40.
Install the lower strut spacer using factory hardware and torque. Once the lower is tightened, torque the top nuts.
41. 42.
39.
Reinstall OEM
hardware
without the
plastic cam
locks
into is
original location
noting original
direction of
cam bolts and
marks done
when you re-
moved them.
Install the pin into the spindle.
Add a washer and a standard nut. Tighten down to seat the
43-1. 43-2.
Note:
Steps 43-1
to 43-8 are
the same
for alumi-
num or
steel sus-
pension.