ReadyLIFT Z-71 GMC Sierra 1500 SST Lift Kit, 2007-2013, 4WD, 2.25F/1.75"R w/ Uniball Control Arms" - Manual (Page 9)

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-3488
9
Revised Feb-2014
Connect outer tie rod end and sway bar end links and tighten.
44. 44-1.
Re-attach brake calipers & torque to 145ft lbs.
Remove the standard nut, replace it with a c-lock nut and tighten. Insert the pin into the lower misalignment spacer.
Lock-tite the upper misalignment spacer and install. Tighten down the misalignment spacers and install the cap.
Make sure the cap fits nice and tight.
You may need to put a small amount of
grease on the o-ring of the cap to help pre-
vent the o-ring from rolling and binding up.
A trick also is to twist the cap while applying
pressure to achieve a nice and snug fit.
43-6. 43-5.
43-4. 43-3.
43-7. 43-8.