Installing the modem – Actiontec electronic DataLink V.90 PC Card Fax Modem PCMCIA User Manual

Page 12

Advertising
background image

8

2 Before You Begin

9

The Modem is a Type II PCMCIA card and installs in a Type II or Type III 68-pin
PCMCIA slot. Notebook computers usually have PC Card slots located on the
side of the computer.

To install the Modem, slide it gently into the slot, with the label facing up. Press firmly
until the Modem is seated completely in the slot. If the slot openings are recessed,
it may be difficult to insert the Modem correctly. When the Modem is properly
installed, it “clicks” into place, especially in newer notebook computers. The figure
below shows the Modem being installed into a typical notebook computer.

3

Installing the
Modem

Advertising