Readylift – ReadyLIFT Ford F250 Super Duty SST Lift Kit: 1999-2004, 4WD Only - 2.0F/2.0"R" User Manual

Page 4

Advertising
background image

ReadyLift

®

(Part# 69-2085)

1999-2004 Ford F-250 4WD Lift Kit

Installation Instructions

Revised

6/3/2010

ReadyLift Suspension, Inc.

3201 W. MacArthur Blvd, Santa Ana, CA, 92704

Tol l Fre e (8 8 8 )9 2 2 - 2 2 9 4 F ax 7 1 4 - 86 2 - 2 9 72

Please read instructions thoroughly and completely before beginning installation.

Check www.Readylift.com for any updated installation instruction.

Installation by a trained mechanic is recommended.

Install the lower shock and bolts.

Tighten to 60 ft-lb. Repeat steps 1-12 on passenger side.

Clean the inside of the track bar tube on both ends with a file

of sandpaper.

Press the offset drilled sleeves into the the track bar holes.

DO NOT HAMMER!

11.

14.

13.

12.

Install the upper mounting plate. Increasing the hole on the

upper plate may be necessary in some cases. Install the u-
bolts provided.

Rotate the axle pad up and install the u-bolt nuts and washers

provided. Tighten to 125 ft-lb.

9.

10.

Advertising