ReadyLIFT Toyota Tundra SST Lift Kit: 2007-2012, 2WD & 4WD - Non-TRD - 3.0F/1.0"R" - Manual (Page 5)

www.ReadyLIFT.com
Phone (702)410-2300
Installation Instructions (69-5075 & 69-5076)
.
Raise vehicle securely by frame and support axle with jack..
Raise axle and ensure locating pins are properly aligned. Place new lift block into position between axle and leaf pack.
Carefully lower axle and remove u-bolts Remove u-bolt nuts and lower plate.
Remove rear lower shock bolt and disconnect shock. Disconnect ABS wiring brackets from axle.
Work on one side at a time to prevent driveline damage.