ReadyLIFT Toyota Tundra 4 SST Lift Kit: 2007-2014, 2WD/4WD - 4.0"F-2.0R"" User Manual

Page 8

Advertising
background image

www.ReadyLIFT.com

Phone (702)410-2300

Installation Instructions (69-5475 & 69-5476)

.

Work on one side at a time to prevent driveline damage.

Slide new u-bolts over leaf pack and bump stop bracket.

Raise axle and ensure locating pins are properly aligned.

Place new lift block into position between axle and leaf pack.

Carefully lower axle and remove u-bolts

Remove u-bolt nuts and lower plate.

Remove rear lower shock bolt and disconnect shock.

Disconnect ABS wiring brackets from axle.

Advertising