ReadyLIFT Ford Raptor 2010-2014 - Mid Travel Off Road Upgrade Kit User Manual
Page 7
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 44-2150
7
Install the clevis into the steering rack and align the fork so the opening
is vertical.
33.
Install the sleeve into the rod end and install the tie-rod into the clevis.
34.
Install the sway bar end links to the LCA. Then install the top of the link to the sway bar.
If not using Kit # 67-2999 install supplied socket head allen bolt to cap sway bar
mount for future use and to protect the thread bung.
29.
Install the sway bar end links to the sway bar bracket.
Install the nut to the outside of vehicle
30.
Remove the boot from the steering rack. Unscrew the tie-rod from the
steering rack.
31.
Put red lock-tite on the clevis front and back and on the screw.
32.
Install the pin into the tie-rod mounting hole on the spindle and tighten down
using a washer and a standard nut to seat the pin. Replace the stan-
dard nut with a c-lock nut.
35.
Insert the misalignment spacers into the tie-rod and install onto the pin.
Use a washer and a c-lock nut and tighten down.
36.