Step 5, Step 6, Install the arms – Anthro Utility Bench II Assembly Instructions User Manual
Page 5: Install the bench pans

Utility Bench II Assembly Instructions
5
STEP 5
Install the Arms
¡
Position one Utility Bench Arm onto a Leg Assembly.
¡
Align the top two openings of the Arm with Hole 2
of the Leg Assembly. Loosely install a Self-threading
Screw through the top two holes of the Arm and into
the Leg.
¡
Install the remaining six Self-threading Screws into
the Arm, but do not fully tighten.
¡
Repeat for the second Arm.
STEP 6
Install the Bench Pans
¡
Position a Bench Pan between the Arms, aligning the
two tabs on each Arm with the two holes on the lower
corners of the Pan. Insert a Pan Screw through the Pan
and the Arm Tab and capture it with a Keps Nut (but
do not fully tighten). Tighten with the 3-way Wrench.
¡
Repeat for the other end of the Pan and for both ends
of the second Pan.
Keps Nut
325-5130-03
Pan Screw
325-5003-00
1/2” Button-head Screw
325-5003-00
Self-threading Screw
325-5010-00
Utility Bench Arm
Bench Pan