Brocade ICX 6650 Hardware Installation Guide - Manual (Page 20)

‐ SX
‐ LX
‐ Copper
• 10 GbE
‐ SFP+: USR, Short Reach, Long Reach
‐ Active twinaxial copper (1 meter, 3 meter, and 5 meter)
‐ 10 GbE ER SFP+
• 40 GbE
‐ Standard 40 GbE (SR4) transceiver without breakout
‐ 40 GbE (SR4) QSFP+ transceiver with breakout to 4x10 GbE up to 100 meters on OM3
fiber
‐ 40 GbE direct attach (DAC) copper breakout (1 meter, 3 meter, and 5 meter)
‐ 40 GbE QSFP to QSFP active twinaxial (1 meter, 3 meter, and 5 meter)
‐ 40 GbE (LR4) QSFP+ transceiver up to 10 km
NOTE
Non-branded active twinaxial cables can be used, but Brocade does not support them.
Breakout cables
The rear panel of the Brocade ICX 6650 contains two 4x10 GbE ports which support the following
cables:
Breakout cables
18 Brocade ICX 6650 Hardware Installation Guide
53-1003083-01