Brocade FastIron Ethernet Switch Software Licensing Guide User Manual

Page 47

Advertising

Disable ports in group 1 or 2.

Brocade(config)# no fpod-40g-enable group 2

Enable ports in group 3.

Brocade(config)# fpod-40g-enable group 3

Use the show pod command to display configuration information for the groups enabled
as shown in the following example output.

Brocade(config)#show pod

Unit-Id: 1

PoD 10G license capacity: 24

PoD 10G license capacity used: 24

PoD 40G license capacity: 4

PoD 40G license capacity used: 4

PoD-ports Lic-Available Lic-Used

1/1/33 Yes Yes

1/1/34 Yes Yes

1/1/35 Yes Yes

1/1/36 Yes Yes

1/1/37 Yes Yes

1/1/38 Yes Yes

1/1/39 Yes Yes

1/1/40 Yes Yes

1/1/41 Yes Yes

1/1/42 Yes Yes

1/1/43 Yes Yes

1/1/44 Yes Yes

1/1/45 Yes Yes

1/1/46 Yes Yes

1/1/47 Yes Yes

1/1/48 Yes Yes

1/1/49 Yes Yes

1/1/50 Yes Yes

1/1/51 Yes Yes

1/1/52 Yes Yes

1/1/53 Yes Yes

1/1/54 Yes Yes

1/1/55 Yes Yes

1/1/56 Yes Yes

1/2/1 Yes Yes

1/2/2 Yes Yes

1/2/3 No No

1/2/4 No No

1/3/1 Yes Yes

1/3/2 Yes Yes

1/3/3 Yes Yes

1/3/4 Yes Yes

1/3/5 Yes Yes

1/3/6 Yes Yes

1/3/7 Yes Yes

1/3/8 Yes Yes

Licensing for Ports on Demand

FastIron Ethernet Switch Software Licensing Guide

53-1003091-02

Advertising