Brocade FastIron Ethernet Switch Software Licensing Guide - Manual (Page 51)

Licensed features and part numbers (Continued) TABLE 8
Product Licensed feature or
feature set Image filename Part numbers for
software license
only Part numbers for
hardware with pre-
installed software
license
ICX 6450
ICX 6450C
Software licensing is
only supported on
ICX 6450 devices.
Premium Layer 3:
• IPv4 OSPF v2
• IPv4 OSPF v3
• RIP v1, v2
• RIPng
• VRRP
• VRRP-E
• GRE
N/A 1 ICX6450-PREM-LIC N/A
ICX 6450- Ports on
Demand license
The ICX 6450 device
has four active uplink
or stacking ports on
slot 2. By default,
ports 1 and 3 are 10
Gbps ports. By
default, without a
license at bootup,
ports 2 and 4 come
up in 10 Gbps port
speed in an error-
disabled state. To
enable ports 2 and 4
to 10 Gbps port
speed, purchase the
ICX6450-2X10G-LIC-
POD license.
N/A 1 ICX6450-2X10G-LIC-
POD Sold separately. To
purchase the Ports
on Demand license,
contact your Brocade
representative.
Appendix A: FastIron Licensed Features and Part Numbers
FastIron Ethernet Switch Software Licensing Guide 49
53-1003091-02