Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 17)

New OSPFv2 commands (Continued) TABLE 4
Command Note
cost ( area decimal range advertise sub-
command)
Configures area range cost for Advertise this type-3
summarization.
cost ( area decimal range not-advertise sub-
command)
Configures the area range cost for Not Advertise this type-3
summarization.
Interface level command
[no] active Configures Active information. FastIron 07.4.00 behavior was
always active.
Show command
show ip ospf database database-
summary Displays summary of OSPF database.
show ip ospf summary Displays summary of OSPF instances.
show ip ospf traffic Displays OSPF packet counters and errors.
show ip ospf vrf Displays OSPF information for interfaces configured in a
particular VRF.
Clear command
clear ip ospf traffic Clears OSPF packet counters and errors.
clear ip ospf vrf Resets OSPF for VRF.
Modified OSPFv2 commands TABLE 5
FastIron 08.0.xx FastIron 07.4.00 Note
Global level command (router OSPF and sub-command)
Upgrade and downgrade considerations
FastIron Ethernet Switch Software Upgrade Guide 15
53-1003089-02