Brocade FastIron Ethernet Switch Software Upgrade Guide - Manual (Page 82)

show command output differences between 07.4.00 and 08.0.xx
show tech-
support l3
ipv4-uc
Too big to paste IP Routing Table,
IP Ospf Trap, IP
Ospf Error, IP Ospf
Resource, IP Ospf
Neighbor Detail, IP
Ospf Virtual-link, IP
Ospf Virtual-
neighbor, IP RIP
Routes, and IP RIP
Interfaces
information
removed.
show ipv6
route rip
Brocade#show ipv6 route rip
Type Codes - B:BGP C:Connected I:ISIS L:Local O:OSPF R:RIP S:Static
BGP Codes - i:iBGP e:eBGP
OSPF Codes - i:Inter Area 1:External Type 1 2:External Type 2
Type IPv6 Prefix Next Hop Router Interface Dis/Metric
Uptime
R 7124::/64 fe80::224:38ff:febb:e500
ve 4011 100/2
0m0s
R 8111::1/128 fe80::224:38ff:febb:e500
ve 4011 100/2
0m0s
Brocade#
ISIS option is
added. And, OSPF
Codes displayed in
a different format.
show ipv6
route
static
Brocade#show ipv6 route static
Type Codes - B:BGP C:Connected I:ISIS L:Local O:OSPF R:RIP S:Static
BGP Codes - i:iBGP e:eBGP
OSPF Codes - i:Inter Area 1:External Type 1 2:External Type 2
Type IPv6 Prefix Next Hop Router Interface Dis/Metric
Uptime
ISIS option is
added. And, OSPF
codes are
displayed in a
different format.
show ipv6
route
summary
Brocade#show ipv6 route summary
IPv6 Routing Table - 6 entries:
6 connected, 0 static, 0 RIP, 0 OSPF, 0 BGP, 0 ISIS
Number of prefixes:
/64:6
ISIS option is
added.
FastIron Ethernet Switch Software Upgrade Guide
53-1003089-01