Brocade FastIron Ethernet Switch IP Multicast Configuration Guide - Manual (Page 227)

History
Release version Command history
8.0.10 This command was introduced.
show ipv6 static mroute
Displays information for configured IPv6 multicast routes.
Syntax show ipv6 static mroute [ vrf vrf-name ] ipv6-address-prefix/prefix-length
Parameters vrf vrf-name
Specifies a VRF route.
ipv6-address-prefix/prefix-length
Specifies an IPv6 address.
Modes Privileged EXEC mode
Usage Guidelines Only resolved and best static mroutes are added to the mRTM table. These routes are prefixed with an
asterisk in the output from the show ipv6 static mroute command.
Examples This example displays information for configured IPv6 multicast routes:
Device(config)# show ipv6 static mroute
IPv6 Static Routing Table - 1 entries:
IPv6 Prefix Interface Next Hop Router Met/Dis/Tag Name
*1:1::1:0/120 ve 90 :: 1/1/0
History
Release version Command history
8.0.10a This command was introduced.
show ipv6 static mroute
FastIron Ethernet Switch IP Multicast Configuration Guide 225
53-1003085-02