Brocade FastIron SX, FCX, and ICX Diagnostic Reference - Manual (Page 98)

86 Brocade FastIron SX, FCX, and ICX Diagnostic Reference
53-1003076-02
Web debug commands
4
This command displays debugging information of VRRP events only within the device.
Brocade# debug ip vrrp events
VRRP: events debugging is on
[44fd]VRRP (IPv4): 10.10.10.1 transit to master! IP addr 10.10.10.2 vrid 10, pri
100
[44fd]VRRP (IPv6): fe80::7:1 transit to master! IP addr fe80::7:1 vrid 10, pri 100
[4511]VRRP (IPv6): fe80::8:1 transit to master! IP addr fe80::8:1 vrid 11, pri 255
debug ip vrrp vrid
Syntax: [no] debug ip vrrp vrid decimal
This command filters VRRP or VRRP-E debugging using a virtual router identifier (VRID). The
decimal variable refers to the VRID.
Brocade# debug ip vrrp vrid 100
Debug VRID: 100 for both IPv4 and IPv6 instances
Web debug commands
The following debug ip web commands display information about the web transactions.
debug ip web
Syntax: [no] debug ip web
This command activates the web debugging.
Brocade# debug ip web
WEB: debugging is on
debug ip web-ssl
Syntax: [no] debug ip web-ssl
This commands activates web Secured Socket Layer (SSL) debugging.
Brocade# debug ip web-ssl
WEB SSL: debugging is on