Clear openflow flowid | all – Brocade Multi-Service IronWare Software Defined Networking (SDN) Configuration Guide (Supporting R05.6.00) User Manual
Page 44
34
Multi-Service IronWare SDN Configuration Guide
53-1003034-02
clear openflow flowid | all
1
clear openflow flowid | all
Delete flows from the flow table.
Syntax
clear openflow flowid|all flow-id
Parameters
Flow ID
Clears the given flow-id that you want to delete from the flow table
.all
Deletes all flows from the flow table
Command
Modes
User EXEC mode
Privileged EXEC mode
Global configuration mode
Usage
Guidelines
When an OpenFlow rule or all flows in the flow table need to be deleted you can use the clear
openflow flowid/all flow-id
command. Use this command to delete a single OpenFlow rule based
on a flow-id or delete all flows in the flow table.
Brocade# clear openflow flowid 6
Brocade# clear openflow all
History
Release
Command History
Multi-Service IronWare
R05.5.00C
This command was modifed to delete single flow
on given flow-id or all flow deletion in the flow
table.