Brocade Fabric Watch Administrators Guide (Supporting Fabric OS v7.3.0) - Manual (Page 77)

FOP_Port and FCU_Port subclass default settings (Continued) TABLE 18
Area Description Default threshold
settings Default alarm
settings Threshold state
Sync loss Monitors the number of loss
of synchronization errors. Unit: Errors
Time Base: minute
Low: 0
High: 500
Buffer: 50
Below: 0
Above: 0
Informative
Out_of_range
Protocol errors
(PE) Monitors the number of
primitive sequence errors. Unit: Errors
Time Base: minute
Low: 0
High: 5
Buffer: 0
Below: 0
Above: 0
Informative
Out_of_range
Received packets
(RXP) Monitors the receive rate, by
percentage. Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0
Below: 0
Above: 0
Informative
Informative
State changes
(ST) Monitors state changes. Unit: Changes
Time Base: minute
Low: 0
High: 50
Buffer: 0
Below: 0
Above: 0
Informative
Out_of_range
Transmitted
packets (TXP) Monitors the transmit rate,
by percentage. Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0
Below: 0
Above: 0
Informative
Informative
Trunk utilization
(E_Port,
FCU_Port, and
FOP_Port) The percent of utilization for
the trunk at the time of the
last poll. Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0
Below: 0
Above: 0
Informative
Informative
Port Monitoring
Fabric Watch Administrators Guide 77
53-1003142-01