Specifications, Physical specifications, Power cord specifications – Brocade Mobility RFS7000-GR Controller Installation Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 13: Power protection, 2 specifications, Physical specifications power cord specifications
Brocade Mobility RFS7000-GR Controller Installation Guide
5
53-1001946-01
Chapter
2
Specifications
In this chapter
•
Physical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
•
Power cord specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Physical specifications
Power cord specifications
A power cord is not supplied with the controller. Use only a correctly rated power
cord certified (as appropriate) for the country of operation
.
Power protection
•
If possible, use a circuit dedicated to data processing equipment. Commercial
electrical contractors are familiar with wiring for data processing equipment
and can help with the load balancing of these circuits.
Width
440mm (17.32 in)
Height
44.45mm (1.75 in)
Depth
390.8mm (15.38 in)
Weight
6.12 Kg (13.5 lbs)
Operating Temperature
0
°
C - 40
°
C
Operating Humidity
5% - 85% RH, non-condensing
Operating Altitude
3 km (10000 ft)