Site preparation, Package contents, External antenna model package contents – Brocade Mobility 1220 Access Point Installation Guide User Manual
Page 8: Internal antenna model package contents
Site preparation
1
Brocade Mobility 1220 Access Point Installation Guide
3
53-1002916-01
Site preparation
•
Consult your site survey and network analysis reports to determine specific
equipment placement, power drops, and so on.
•
Assign installation responsibility to the appropriate personnel.
•
Identify and document where all installed components are located.
•
Ensure adequate, dust-free ventilation to all installed equipment.
•
Identify and prepare Ethernet and console port connections.
•
Verify cable lengths are within the maximum allowable distances for optimal
signal transmission.
Package contents
A Mobility 1220 Access Point is available in integrated antenna and external
antenna models. Contents differ depending on the model ordered.
External antenna model package contents
•
Mobility 1220 Access Point with external antenna connectors (Plenum Rated)
•
2 customer installed mounting lugs
•
4 mounting lug retaining screws
•
Brocade Mobility 1220 Access Point Installation Guide (This Guide)
Internal antenna model package contents
•
Mobility 1220 Access Point with internal antennas
•
Brocade Mobility 1220 Access Point Installation Guide (This Guide)