Brocade Mobility 1220 Access Point Installation Guide - Manual (Page 9)

Package contents
1
4 Brocade Mobility 1220 Access Point Installation Guide
53-1002916-01
Features
• 2 RJ-45 connectors, one for 10/100/1000 Ethernet and the other for the
serial/console connector
• LED indicators
• Slots for wall mounting
• Clips for mounting on a suspended ceiling T-bar (internal antenna model only)
with separately orderable accessories
• Lock port for Kensington® style Security Lock
The Mobility 1220 Access Point has one RJ-45 connector supporting an
10/100/1000 Ethernet port and accepts 802.3af-compliant power from an
external source. The illustration below is of an integrated antenna model.
NOTE
When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable is
recommended for Gigabit operation.
The Mobility 1220 Access Point comes with dual radios supporting 802.11a/b/g/n.
The access point contains runtime firmware which enables the unit to boot after a
power up. The runtime firmware on the access point and the firmware downloaded
from the connected controller can be updated via the Ethernet interface.
NOTE
When connecting to a Mobility 1220 Access Point, note that the baud rate is
115,200 as opposed to 19,200.
DC12V GE1/PoE Console
DC12V
GE1/PoE
Console