Brocade Virtual ADX Installation and Deployment Guide (Supporting ADX v03.1.00) - Manual (Page 46)

FIGURE 14 XenCenter: New Network name
d) After entering a name and description for the new network, click Next .
1. If you are creating a Single-Server Private Network (Step 3.c above), the following
window will display showing the network that you have just created. If you need to add
another network, return to Step 3. If you have created all the networks required by the
Brocade Virtual ADX VM, proceed to Step 4.
FIGURE 15 XenCenter: Server Networks - new single-server network
2. If you are creating an External Network (Step 3.c above), the following window will
display. Choose the physical NIC this network will connect with and specify the VLAN
ID.
Brocade Virtual ADX Installation on Citrix XenServer
46 Brocade Virtual ADX Installation and Deployment Guide
53-1003241-01