Burcam 506221S S.W. CAST IRON JET PUMP 3/4HP 115/230V User Manual
Installation instructions, Jet pump
2190 Boul. Dagenais West
TEL: 514.337.4415
LAVAL (QUEBEC)
FAX: 514.337.4029
CANADA
H7L 5X9 [email protected]
INSTALLATION
INSTRUCTIONS
MODEL
506221S
JET
PUMP
Please read these
instructions
carefully. Failure
to comply to
instructions and
designed
operation of
this system,
may void the
warranty.
Your pump has been carefully packaged
at the factory to prevent damage during
shipping. However, occasional damage
may occur due to rough handling.
Carefully inspect your pump
for
damages that could cause failures. Report
any damage to your carrier or your point of
purchase.
© 2003 BUR-CAM Printed in Canada 506513
Factory set voltage 115 V
Connection voltage changing:
Before changing the voltage connection:
A) Ensure the power to the pump is disconnected.
B) Open motor junction box cover.
C) Please select the up knob position for 115 V
or down knob position for 230 V.
or
Pull voltage selector knob 1/4” and align
arrow with desired connection voltage.
D) Push back in voltage selector knob.
E) Close motor junction box.