AT&T 2820 - Manual (Page 17)

E
N
16
The number stored in call log can be reformatted prior to dialing. To edit
the number:
1. Touch
or to select the number you wish to dial from call log
memory.
2. Touch
. The number you selected can now be reformatted by
touching again to choose the format you prefer, and also touch
0-9 to edit prefix while reformatting.
For example: The caller ID number 206-123-4567 can be reformatted
by pressing the
key as shown below. (NOTE: For details on
how to edit Phonebook entries please see the section in this manual
titled PHONEBOOK on Page 12.)
Press
, Caller ID shows 206-123-4567.
Press again, Caller ID shows 061234567.
Press again, Caller ID shows 61234567.
Press again, Caller ID shows 123-4567.
Press again, Caller ID shows 206-123-4567 again.
You may add prefix numbers before displayed numbers by touching
the desired prefix numbers.
The ‘
* ’ key may be added to the dialing string and a ‘#’ may be
pressed to enter a Pause (‘P’).
3. Touch to dial the number.
1. Touch or to review the call log. The number of missed and
total calls will be displayed.
2. Use
or to select the number you wish to save.
3. Touch . The cursor is pointing to ‘ADD RECORD’
4. Touch to confirm.
SAVING CALLER ID RECORDS TO PHONEBOOK
FORMATTING CALLER ID NUMBERS