Davey PoolSweepa Hybrid - Robotic Suction Pool Cleaner - Manual (Page 5)

Hybrid - Robotic Suction Pool Cleaner | Operating Instructions 3
❙ ❙
Warnings
• Do not enter the pool while the cleaner is working.
• The manufacturer is not responsible for any damage to the external pump.
❙ ❙
Specifications
• Wight – 4.5 kg / 9.9lb
• Hose length – 10 Hoses of 1.17m / 3.83ft
• Required water flow – 5-8m
3
❙ ❙
Water conditions
• Chlorine – Max 4ppm
• pH – 7.0-7.8
• NaCl – Max – 5000ppm
• Temperature – 6-34°C / 43-93°F
NOTE:
An optional Leaf Canister is also available for purchase from your supplier.
The Leaf Canister traps leaves and other large debris, preventing blockage of the
pool filter system. For maximum energy, backwash savings and environmentally
friendly operation, we recommend using the Leaf Canister.
❙ ❙
Pool Preparation
To prepare the pool for cleaning:
1 Remove any large
objects that might
interfere with the
cleaner’s operation.
2 Make sure that the
water level reaches
the skimmers.
3 Backwash the pool
filter and make sure
that suction pressure
is sufficient, as
recommended by the pump manufacturer.
❙ ❙
Setup
Connect the Hose
The Hybrid Cleaner connects to the pump of your pool, either by a built-in dedicated suction line or
through one of the pool skimmers.
Connect the Hose Sections in the pool under water.
1 Switch the pool pump OFF.
2 Insert the flexible Skimmer Adaptor (only if needed) into the suction line opening and make sure
to connect the Automatic Safety Valve. (Allows water flow into the pump in case the Cleaner is
blocked by a foreign object).
CAUTION
Connecting to Skimmer Connecting to Suction Line
First
Hose
Section
Safety Valve
Suction
Line
Skimmer
Adapter
First
Hose
Section
Safety Valve
Skimmer
Adapter
Suction Line
B