Davey PoolSweepa Hybrid - Robotic Suction Pool Cleaner - Manual (Page 8)

6 Hybrid - Robotic Suction Pool Cleaner | Operating Instructions
Cleaning Process
The Hybrid Cleaner continues to clean
your pool as long as the pool pump is operating.
The time required to cover all pool surfaces depends
on the pool size. In general, 1-2 hours are sufficient.
During operation, refer to the indicator lights
(Drawing G) on the cleaner to make sure that the
Hybrid Cleaner is functioning properly
(see table below).
Table 2: Indicator Lights
Light Indication
Red (2 sec.) Start of operation
Blue — slow blinking Proper functioning — The Hybrid Cleaner is moving forward.
Blue — fast blinking Proper functioning — The Hybrid Cleaner is making a turn.
Blue and red (2 sec.) Proper functioning — The Hybrid Cleaner identifies a wall.
Red — blinking
• Insufficient flow — To correct unsatisfactory flow, refer to Table 1.
• Use the Troubleshooting Guide (Table 3) .
G
❙