Z87h3-a2x extreme (golden) user manual, Chapter 2, 4. installing hardware – Elitegroup Z87H3-A2X GOLDEN (V1.0) User Manual

Page 16

Advertising
background image

Chapter 2

10

Z87H3-A2X EXTREME (GOLDEN) USER MANUAL

2-4. Installing Hardware

This motherboard has an LGA1150 socket.

When choosing a processor, consider the performance requirements of

the system. Performance is based on the processor design, the clock speed
and system bus frequency of the processor, and the quantity of internal
cache memory and external cache memory.

You may be able to change the settings in the system Setup Utility. We

strongly recommend you do not over-clock processor or other
components to run faster than their rated speed.

The following illustration shows CPU installation components.

A. Press the hook of lever down with your thumb and pull it to the right
side to release it from retention tab.

B. Lift the tail of the load lever and rotate the load plate to fully open
position.

C. Grasp the edge of the package substrate. Make sure pin 1 indicator
is on your bottom-left side. Aim at the socket and place the package
carefully into the socket by purely vertical motion.

2-4-1. Installing the Processor

Advertising
This manual is related to the following products: