Z87h3-a2x extreme (golden) user manual, Chapter 7, Resetting disks to non-raid – Elitegroup Z87H3-A2X GOLDEN (V1.0) User Manual
Page 96: Exiting setup
90
Z87H3-A2X EXTREME (GOLDEN) USER MANUAL
Chapter 7
Resetting disks to Non-RAID
An HDD that has been previously configured as part of another RAID set
in another platform is called a broken RAID HDD. When you install a
broken RAID HDD, you cannot select this disk when configuring a RAID set
through the Intel
®
Rapid Storage Technology option. If you still want to
use this broken RAID HDD as part of the RAID set configured through the
Intel
®
Rapid Storage Technology, you may do so by resetting the disk to
Non-RAID. You will, however, lose all data and previous RAID
configurations.
To reset disks to Non-RAID:
1.
In the main Intel
®
Rapid Storage Technology RAID BIOS menu, highlight Reset
Disks to Non-RAID using the up/down arrow key then press <Enter>.
2.
Use the space bar to select the HDD to reset to Non-RAID.
3.
A dialogue box appears to confirm the action. Press <Y> to confirm;
otherwise, press <N>.
Pressing <Y> deletes all the data in the HDDs.
When you have finished, highlight Exit using the up/down arrow key then press
<Enter> to exit the Intel
®
Rapid Storage Technology RAID BIOS utility.
A dialogue box appears to confirm the action. Press <Y> to confirm; otherwise, press
<N> to return to the Intel
®
Rapid Storage Technology RAID BIOS menu.
Exiting Setup