B85h3-a3 user manual, Chapter 3, Power management setup – Elitegroup B85H3-A3 (V1.0) User Manual

Page 39

Advertising
background image

Chapter 3

B85H3-A3 USER MANUAL

35

Power Management Setup

This page sets up some parameters for system power management operation.

Resume By PME (Disabled)

The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI/PCI-E
Modem or PCI/PCI-E LAN card. You must use an ATX power supply in order to use this
feature. Use this item to do wake-up action if inserting the PCI/PCI-E card.

Resume By USB (Disabled)

This item allows you to enable or disable the USB device wakeup function from S3
mode.

EUP Function (Enabled)

This item allows user to enable or disable EUP support.

Resume By RING (Disabled)

An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call
on the modem) awakens the system from a soft off state.

Power LED Type (Dual Color LED)

This item shows the type of the Power LED.

Resume By PS2 MS (Disabled)

This item enables or disables you to allow mouse activity to awaken the system
from power saving mode.

Resume By PS2 KB (Disabled)

This item enables or disables you to allow keyboard activity to awaken the system
from power saving mode.

Main

Advanced

Chipset M.I.B. III Boot Security Exit

+/- : Change Opt.

Enter/Dbl Click : Select

lk

mn

: Select Screen

/Click: Select Item

F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit

About Resume by Ring

Resume By RING
Resume By PME

Disabled

Resume By USB

Disabled

Resume By PS2 KB

Disabled

Resume By PS2 MS
Resume By RTC Alarm

Disabled

EUP Function
Power LED Type

Disabled

Disabled

Enabled

Press <Esc> to return to the Advanced Menu page.

Resume By RTC Alarm (Disabled)

The system can be turned off with a software command. If you enable this item,
the system can automatically resume at a fixed time based on the system’s RTC
(realtime clock). Use the items below this one to set the date and time of the wake-
up alarm. You must use an ATX power supply in order to use this feature.

Power Management Setup

Dual Color LED

Advertising