Elitegroup B85H3-A3 (V1.0) - Manual (Page 43)

Chapter 3
B85H3-A3 USER MANUAL
39
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit, you can enables
this item to prevent the system from “rebooting” when trying to install Windows NT
4.0.
ESC/Right Click: Exit
F3: Optimized Defaults
/Click: Select Item
Execute Disable Bit (Enabled)
This item allows the processor to classify areas in memory by where application
code can execute and where it cannot. When a malicious worm attempts to insert
code in the buffer, the processor disables code execution, preventing damage or
worm propagation. Replacing older computers with Execute Disable Bit enabled
systems can halt worm attacks, reducing the need for virus related repair.
Intel Virtualization Technology (Enabled)
When disabled, a VMM cannot utilize the additional hardware capabilities provided
by Vandor Pool Technology.
LakeTiny Feature (Enabled)
Use this item to enable or disable the LakeTiny for C state configuration.
CPU C3 Report (Enabled)
CPU C6 Report (Disabled)
Use this item to enable or disable CPU C3 (ACPI C2) report to OS.
CPU C7 Report (Disabled)
Use this item to enable or disable CPU C6 (ACPI C3) report to OS.
Press <Esc> to return to the Advanced Menu page.
Package C State limit (AUTO)
Use this item to set the package C state limit.
Enhanced Halt (CIE) (Enabled)
Use this item to enable the CPU energy-saving function when the system is not run-
ning.
Use this item to enable or disable CPU C7 report to OS.