Elitegroup A907 (VD) - Manual (Page 63)

51
Ø The settings are Auto (AMIBIOS automatically determines the correct base I/O port
address) (default value), Disabled, 3F8/COM1, 2F8/COM2, 3E8/COM3 or 2E8/COM4.
OnBoard IR
This is only a display-only item and cannot be altered.
Serial Port3 Mode
This is only a display-only item and cannot be altered.
Serial Port3 IRQ
This option specifies the IR IRQ select for the IR port.
Ø The settings are 3 (default value), 4, 5, 9, 10, and 11.
Serial Port3 DMA
This is only a display-only item and cannot be altered.
IR Transceiver module Type
This is only a display-only item and cannot be altered
IR Half-Duplex Time-Out
This optio n specifies the enabled or disabled the IR function.
Ø The settings are Disabled or Enabled (default value).