Elitegroup A907 (VD) - Manual (Page 64)

52
OnBoard Parallel Port
This option specifies the base I/O port address of the parallel port on the motherboard.
Ø The settings are Auto (default value), Disabled, 378h, 278h, or 3BCh.
Parallel Port Mode
This option specifies the parallel port mode.
Ø The settings are Normal, Bi-dir, EPP or ECP (default value).
Parallel Port IRQ
This is only a display-only item and cannot be altered.
Parallel Port DMA Channel
This is only a display-only item and cannot be altered.
Change Supervisor Password
This field allows you to set the Supervisor password. To set the Supervisor password, highlight
this field and press the [Enter] key. The following dialog box appears:
Enter new supervisor password: