Elitegroup P60 - Manual (Page 8)

vi
^
This device must be used with Access Points that have
employed and activated a radar detection feature required
for European Community operation in the 5GHz bands. This
device will operate under the control of the Access Point in
order to avoid operating on a channel occupied by any radar
system in the area. The presence of nearby radar operation
may result in temporary interruption in communications of
this device. The Access Point’s radar detection feature will
automatically restart operation on a channel free of radar.
You may consult with the local technical support staff
responsible for the wireless network to ensure the Access
Point device(s) are properly configured for European
Community operation.
Notice:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment. Shielded interface cables and a non-
shielded AC power cord must be used in order to comply with
emission limits.
This equipment is to be used with power supply:
65W
There is no internal power supply.