Elitegroup EZ-Buddie2 D21 I4-3 Manual - Manual (Page 41)

37
USB Controller (Enabled)
Enable this item if you plan to use the Universal Serial Bus ports on this
motherboard.
USB 2.0 Controller (Enabled)
Enable this item if want to use the USB 2.0 controller.
USB Keyboard Support (Enabled)
Enable this item if you plan to use a keyboard connected through the USB
port in a legacy operating system (such as DOS) that does not support Plug
and Play.
USB Mouse Support (Enabled)
Enable this item if you plan to use a USB mouse.
AC97 Audio (Auto)
Enables and disables the onboard audio chip. Disable this item if you are go-
ing to install a PCI audio add-on card.
AC97 MODEM (Auto)
Enables and disables the onboard audio chip. Disable this item if you are go-
ing to install a PCI audio add-on card.
Onboard LAN Device (Enabled)
Enables and disables the onboard LAN.
Onboard LAN BOOT ROM (Disabled)
This item allows you to enable or disable the onboard LAN Boot ROM function.
Onboard 1394 Device (Enabled)
Enable this item if you plan to use this onboard 1394 device on this board.
SuperIO Device
Scroll to this item and press <Enter> to view the following screen:
Phoenix – AwardBIOS CMOS Setup Utility
SuperIO Device
Item Help
POWER ON Function [Hot KEY]
KB Power ON Password [Enter]
Hot Key Power On [Ctrl-F12]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [ECP]
ECP Mode Use DMA [3]
Power On After Power Fail [Off]
Menu Level
↑ ↓ → ← : Move Enter : Select +/-/PU/PD:Value: F10: Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults