Elitegroup EZ-Buddie2 D21 I4-3 Manual - Manual (Page 9)

5
Table of Motherboard Components
Label Component
AGP1 A.G.P. slot (1.5V only)
ATX1 ATX power supply connector
ATX12V ATX12V power supply connector
CDIN1 (Sony) for CD-ROM audio cable
CMJ1 New EZ-Watcher header
CMJ2 USB/1394/MIC/Speaker-out Header
CPU Socket 478 pins DIP socket
DDJ1 CPU over-loading protect header
DIMM1 2.5V un-buffer 184 pins socket (CH-A)
DIMM2 2.5V un-buffer 184 pins socket (CH-B)
FM1 SPDIF out/FM modular Header
IDE1 Primary IDE CONN. (Blue)
IDE2 Secondary IDE CONN
JP1 Clear CMOS jumper
JP6 AC-MODEM (for ECS MODEM card)
LPT1 Parallel port
NBFAN1 Northbridge cooling fan connector
PCI 1 PCI slot 1
SATA1 Serial ATA connector
SYSFAN1 System fan connector
SYSFAN2 CPU fan
This is the end of Chapter 1. The following chapter explains how to install the
motherboard.