Hired-Hand HH Software: Farm Manager - Manual (Page 10)

Part No. 4801-5049 Rev 8/05 Farm Manager Page: 10
Small Icons
Large Icons – This option
is also available from the
Tool Bar and changes the
view of the House and
Controller icons as shown.
Small Icons – This option
is also available from the
Tool Bar and changes the
view of the House and Controller icons as shown.
List – This option works only with small icons and is used to list the controller names in the Contents
section of the screen in alphabetical order.
Details - Clicking on the
Details option for a controller
will allow the user to select which data values, such
as target temperature or water usage, will be
displayed.
Column Headers – Clicking on Column Headers allows the
user to select the data that is displayed in the Details section of
the Farm Manager Main Window. Column headers vary
depending on the type of controller. To select a heading place
click the heading to place a check by the item.
Refresh - Although the Properties
screen is updated automatically every
few minutes, this option provides a
manual trigger to refresh the properties screen.
13. Options Menu
This menu is obtained by
clicking on Options in the
menu bar. The Farm
Manager Options menu
provides access to the General and Alarm Settings
and to the Report Setup options.
13.1 Farm Manager General Settings
HH.Net Options is selected from the
View menu. Three Options windows
are available by clicking on the tabs at
the top of the window. There are 3 tabs in the HHNet
Options section, a General, Network and Log Settings.
The following three control buttons located at the
bottom of the screen are available on all three Farm
Manager Option screens:
Apply – Implements any changes made from any
Options screen but does not exit the screen.
Column Headers