Hired-Hand Evolution Series 1200 - Manual (Page 47)

Part No. 4801-5331 Rev 2-08 Evolution 1200 47 of 64
PowerTrak
AUX
SWITCH
CONTROLLER AC IN
HOT
NE
UT
.
LOW
E
R
GND
.
HOT OUT
CL
OSE IN
O
PEN IN
COM
U
PPE
R
8.9 Connecting the PowerTrak to the Evolution 1200
NOTE: If curtain is setup to pull curtain up to open, then reverse wires connected to "OPEN" and "CLOSE"
terminals.
NOTE: Only 1 Power Trak can be connected to each Power Trak outlet. If Additional Power Traks are needed,
Then use of relay boxes is necessary to separate the load.
NOTE: All PowerTrak units will connect the same.
Inset A
Unit #1 Vents
Inset B
Inset B
Inset A
PCB – 188 Power Ventilation
WARNING!
Keep High Voltage (Or AC)
Separate From Low Voltage
Wires!
PCB 188
Open
Close
Com