Hired-Hand Emergency Back-Up and Alarms: Secondary Sensing System - Manual (Page 31)

Manual No. 4801- 2997 Rev 7-08 Secondary Sensing System 31 of 40
12.5 S
3
PowerTrak Override Settings and Wiring
Secondary Sensing System
PowerTrak
Inset A
Vent Override
for Fail-Safe
Action
INLET MODE
Vent Override Cool 1
Tunnel Override Cool 3
Vents & Tunnel Will Wire The Same
Tunnel Override
NOTE: If curtain is setup to pull curtain up to open, then reverse wires
connected to 'Open' and 'Close' terminals.
Inset B
Inset A
Vents Override
PowerTrak
Inset B
PowerTrak
Inset B Inset A
Vent Override
for Normal
Action
Refer to
Section 6.1
P5 & P6
Settings