Johnson Level & Tool Mfg. 40-6224 - Manual

12101 Arch St., Little Rock, AR 72206 Toll Free (800) 598.5973, (501) 562.0900, (501) 562.0022 – Facsimile
Please visit our website! WWW.lasertoolsco.com
GL58AC and GL58DC Green Laser Technology™ Industrial Alignment Laser
Operating Instructions:
The GL58 Module is designed so that the beam is on the centerline of the tube, is used
for point-to-point alignment, precise layout and positioning, line generator and pointing
applications in site layouts and industrial machine control. The GL58 Module is built for
harsh and hazardous environments and uses green laser light that is 10 times brighter
than comparable red laser light.
Features:
• Solid Brass Construction - Won’t rust or spark
• “O” Ring Seal - Water and Oil Proof to IP67 Standards (1 M for 10 sec.)
• Laser Beam Concentric to O.D. - Easy to align using outside of tube for
reference.
• Beam on Indicator – Verify unit is working from a distance.
• Use as a Laser Chalk Line – Shoot a vertical or horizontal line.
• Large 6 mm Glass Optics – 10 times brighter than standard red lasers.
Optional Accessories:
Soft Shell Case and Laser Chalk Line Optics
Interchangeable apertures – Dot size can be adjusted without changing the dot
position or realigning the tube.
Specifications: Model GL58AC and GL58DC
Dimensions: 3 ¼”(82.55mm)L x ¾”(19mm) Diameter
Weight: 6oz (Excluding Transformer)
Power: 110 VAC or 3V DC at 250mA. Class IIIa @ 532nm
Beam Divergence: <.4mrad.
Note: 1. Do not remove the power transformer from the Model GL58AC Industrial
Alignment Module and connect to alternate power or chassis ground.
2. The shield wire on the power cable is connected to the brass housing.
3. For GL58DC Power Connection – White or Black wire (Negative), Blue or
Red wire (Positive). Do not exceed 3 Volts DC.
4. The laser module is polarity reversal protected.
Manufactured by: Laser Tools Co., Inc., 12101 Arch St., Little Rock, AR 72206
501-562-0900, Fax 501-562-0022,
www.Lasertoolsco.com