Johnson Level & Tool Mfg. 40-6005 - Manual (Page 13)

©2013 Johnson Level & Tool - Rev. 1 13
Area Measurement (Square 2 )
Press Power Button to turn power on.
Press button to enter Area mode.
A rectangle icon will appear on the upper left side of screen.
Observe flashing line for each required measurement (Length & Width).
Follow flashing line instructions on screen to measure width & length.
Press and release button to record measurements.
Area calculation will be presented in sub value position at top of screen.
Note: Unit of measure for area calculation will be displayed in decimal
form in square feet or square meters on main screen.
To tally (or sum) the Area calculations of multiple rooms use the
following steps:
Suggestions:
Be sure you have the desired unit of measure selected.
For better visibility press and hold the backlight button to
activate the backlight.
6834H-English_Manuals 4/2/13 1:28 PM Page 13