KuulAire PACKA53 - Manual (Page 2)

Introduction
The PACKA53, PACKA53-22050, and PACKA53-22060
feature a 3-speed fan and automatic timer that can
be programmed for up to up to 8 hours in 0.5 hour
intervals. The automatic louver swing function provides
directional control and the remote control
(batteries not included)
,
provides convenience. The PACKA53, PACKA53-22050, and
PACKA53-22060 portable evaporative cooler is the latest
in evaporative cooling technology from Port-A-Cool, LLC,
manufacturer of world-class portable cooling units, for
industrial and commercial applications.
WARNINGS AND SAFETY RULES
▲
!
LOCATION
PARTS DESCRIPTION
ELECTRICAL
ASSEMBLY INSTRUCTIONS
WARRANTY
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
REMOTE CONTROL
USE AND OPERATION
▲
!
1. This unit is intended for indoor use. Any other use is
not recommended and may cause fire, electric hazard,
or injury to persons or property, and may void the
warranty.
2. Unplug the unit from power outlet when filling and
refilling water reservoir.
3. Unplug the unit from power outlet when moving the
unit. Use caution when moving the unit when there is
more than half full of water in the reservoir.
4. Unplug the unit from power outlet when cleaning or
servicing.
5. Do not use the unit in areas where gasoline, paint or
any other flammable chemicals are stored.
6. Extreme caution should be taken when used near
children and the elderly. The unit should not be left
unattended for any extended period of time while in
operation.
7. Do not let children play with any packaging material.
8. Do not operate the unit with a damaged power cord.
9. Do not attempt to repair or adjust any electrical or
mechanical functions of the unit.
10. The PACKA53 unit should run on 110-120v 60Hz AC
only PACKA53-22050 on 220-240V 50Hz AC only , and
PACKA53-22060 on 220-240V 60Hz AC only.
11. Do not cover unit air inlet or air outlet openings.
12. This product is not intended for use in wet or damp
locations.
13. When not in use, drain the water from the reservoir
and store the unit in a dry location.
14. Do not run power cord under carpeting or cover with
rugs or runners. Arrange the cord away from areas
where it may be tripped over.
15. Do not use the unit with an extension cable.
16. Do not insert or allow objects to enter the air outlet
opening, as this may cause damage to the blower and
may void the warranty.
17. Use only fresh water to fill the water reservoir. The
use of air fresheners or cleaners is not recommended
as it may damage the unit and void the warranty.
18. Drain the reservoir once every week to reduce calcium
saturation.
19. Do not use this appliance with any solid-state speed
control device.
20. If the unit is damaged or malfunctioning, discontinue
operation and refer to the trouble-shooting
section and/or contact a service technician via
1-888-999-6511.
Basic safety precautions should always be followed when using any electrical appliance.
Filling the Reservoir with Water
The water fill door is located on the side
of the unit. Open the water fill door and
pour water carefully into the reservoir.
Pay attention to the water level indicator
to avoid overfilling the unit. The capacity
of the reservoir is 15 liters/4 gallons.
You can also fill water from the top
compartment.
Draining the Reservoir
Move the unit to a location where water
can be disposed of safely. Remove the
drain plug which is located at the back
of the unit to release water from the
reservoir. Once it is completely drained,
replace the drain plug. The unit is ready
to be filled with fresh water.
WARNINGS AND SAFETY RULES
▲
!
LOCATION
PARTS DESCRIPTION
ELECTRICAL
ASSEMBLY INSTRUCTIONS
WARRANTY
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
REMOTE CONTROL
USE AND OPERATION
▲
!
WARNINGS AND SAFETY RULES
▲
!
LOCATION
PARTS DESCRIPTION
ELECTRICAL
ASSEMBLY INSTRUCTIONS
WARRANTY
CLEANING AND MAINTENANCE
TECHNICAL SPECIFICATIONS
TROUBLESHOOTING
REMOTE CONTROL
USE AND OPERATION
▲
!
CAUTION:
Unplug the unit
from power outlet prior
to moving or servicing, or
filling or draining the water
reservoir. Use caution
when moving the unit if the
reservoir is more than half
full of water.
Side Water Fill
MIN
MAX
ADJUSTING WATER FLOW VALVE
FOR OPTIMAL COOLING
MOVE DIAL TOWARD
MAXIMUM WATERFLOW
FOR ADDITIONAL COOLING
IN DRY CONDITIONS
MOVE DIAL TOWARD
MINIMUM WATERFLOW
FOR ADDITIONAL COOLING
IN HUMID CONDITIONS
MOVE DIAL TOWARD MAXIMUM WATERFLOW
FOR ADDITIONAL COOLING IN DRY CONDITIONS
MOVE DIAL TOWARD MINIMUM WATERFLOW
FOR ADDITIONAL COOLING IN HUMID CONDITIONS
Wait 5 minutes between adjustments to monitor progress
Start with the water adjustment dial set in
the middle of minimum and maximum.
MIN
MAX
ADJUSTING WATER
FLOW VALVE
FOR OPTIMAL
COOLING
Wait 5 minutes between adjustments to monitor progress
Start with the water adjustment dial set in
the middle of minimum and maximum.