Warnings and safety rules, Location parts description – KuulAire PACKA43 User Manual

Page 4

Advertising
background image

WARNINGS AND SAFETY RULES

!

LOCATION

PARTS DESCRIPTION

ELECTRICAL

ASSEMBLY INSTRUCTIONS

WARRANTY

CLEANING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

TROUBLESHOOTING

REMOTE CONTROL

USE AND OPERATION

!

To obtain a current list of Replacement Parts, visit us online at www.port-a-coolparts.com.

WARNINGS AND SAFETY RULES

!

LOCATION

PARTS DESCRIPTION

ELECTRICAL

ASSEMBLY INSTRUCTIONS

WARRANTY

CLEANING AND MAINTENANCE

TECHNICAL SPECIFICATIONS

TROUBLESHOOTING

REMOTE CONTROL

USE AND OPERATION

!

1. Control Panel
2. Water Flow Regulator Knob
3. Rear Cover
4. Water Fill Door
5. Water Level Gauge
6. Base
7. Drain
8. Casters

Symptom

Possible Cause

Possible Solution

No discharge of air

Cord is not plugged in

Power is not on

Make sure cord is plugged in and try to turn the unit on by pressing ON/

OFF button on control panel and remote control. Check the circuit breaker or

check GFCI reset button.

The unit will not

turn off

Damaged PCB

Remote control batteries

Damaged PCB - contact service technician.

Check batteries.

Unit is making noise

No water and water level sensor is

stuck - pump is dry running when COOL

button is pressed.

Clean the reservoir with fresh water and loosen the water level sensor float

inside the reservoir.

Not cooling

Low/No Water

Water flow regulator at MIN setting

Pump doesn’t turn on and low water

alarm turns on with full tank of water

in the reservoir.

Check water level

Change the water regulator setting to MAX

Water level sensor is stuck. Drain/refill with fresh water and loosen the

water level sensor float inside the reservoir.

Odor Emission

Brand new unit

Old unit with algae

Brand new cooling pad will initially emit an odor which will dissipate within

a week of initial use.

If the unit is not new, there may be an algae issue. Replace the cooling pad

and clean the pad regularly.

Water droplets coming

out of air outlet

Calcium saturated water

Clogged cooling pad

Drain water, deep clean and clean the cooling pad.

Cooling pad may need to be replaced.

Advertising