Lincoln Electric IM955 CLASSIC 300 D PERKINS - Manual (Page 17)

C-1 ACCESSORIES C-1
CLASSIC ® 300D PERKINS
OPTIONAL FEATURES (Field Installed)
GENERAL OPTIONS
Pipe Thawing with an arc welder can cause fire,
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc
welder for pipe thawing is not approved by the
CSA, nor is it recommended or supported by
Lincoln Electric.
------------------------------------------------------------------------
Power Plug Kit K802D
A power plug kit for the auxiliary power receptacles is
available. (Provides a plug for each receptacle.)
Spark Arrestor Kit K903-1
Includes a heavy gage steel, approved spark arrestor,
clamp and adapter for mounting to the muffler exhaust
pipe.
MEDIUM TWO-WHEEL ROAD TRAILER WITH DUO-HITCH
K2636-1
For heavy-duty road, off-road, plant and yard use. Includes
pivoting jack stand, safety chains, and 13 in wheels. Overall
width 60 in. Stiff .120 in welded rectangular steel tube frame
construction is phosphate etched and powder coat painted for
superior rust and corrosion resistance.
Low sway suspension gives outstanding stability with man-
ageable tongue weight. Wheels bearings are packed with
high viscosity, high pressure, low washout Lubriplate
® grease.
Features a Duo-Hitch+ - a 2 in Ball/Lunette Eye combination
hitch.
Fender and Light Kit K2639-1
Fender and Light Kit for K2635-1, K2636-1 and
K2637-1 welder trailers.
Cable Rack K2640-1
Cable Rack for K2635-1, K2636-1 and K2637-1
welder trailers.
Stainless Steel Sheet Metal Kit K2423-1
Stainless steel roof and doors. Also includes decals
(mounted), door latches, door hooks, bumpers and all
required mounting hardware. Fits K6090-9 and -10
Pipeliner 200D and K1643-1 thru -6 Classic 300D.
STICK OPTIONS
ACCESSORY SET K704
Includes 35 feet (10 m) of electrode cable and 30 feet
(9 m) of work cable, headshield, work clamp and elec-
trode holder. Cable is rated at 500 amps, 60% duty
cycle.
Remote Control Kit K924-4
Remote Output Control for Stick operation. Contains
switch, receptacle, remote control rheostat, and 100 ft
(30.5m) of cable. Easy field installation.
TIG OPTIONS
TIG Module K930-2
Provides high frequency and shielding gas control for
AC and DC GTAW (TIG) welding applications. Its
compact case is designed for easy carrying, complete
with a handle. High frequency bypass is built in.
Additionally, the K936-3 control cable is required if
remote control is used. If remote control is not used
the K936-4 control cable is required.
PTA-26V TIG Torch K1783-9
Air cooled 200 amp torch equipped with valve for gas
flow control. 25Ft. length.
Control Cable K936-4 (required for TIG Module)
Control cable for connecting the K930-2 TIG Module.
Arc Start Switch K814 (required for TIG Module)
Comes with a 25ft.(7.6m) cable.
Attaches to the TIG torch for convenient finger control.
Contactor Kit K938-1 (required for TIG Module)
Provide “Cold” tungsten Tip when welding with the
TIG Module.
Control Cable Extension K937-45
Allows the TIG Module to be operated at distances up
to 200 ft. from the power source.Available in 45 ft.
(13.7m).
Water Valve Kit K844-1
For use with a water-cooled TIG torch. Installs inside
TIG Module.
WARNING