Lincoln Electric IM955 CLASSIC 300 D PERKINS - Manual (Page 18)

C-2 ACCESSORIES C-2
WIRE FEEDER OPTIONS
Wire Feed Module K623-1
Provides constant voltage (CV) output with improved
arc stability for Innershield welding. Excellent for MIG
welding. Recommended wire feeders are the LN-7,
LN-23P and LN-25. (Factory installed on the K1643-
2).
Remote Control Kit - 100 ft (30.5 m) K2464-1
For use with Classic & Pipeliner engine-driven
welders having a Wire Feed Module installed.
Remote Voltage Control Kit for LN-25 K444-2
Provides 25 ft. (7.5m) of remote output voltage control
and output jumper (2 and 4) for machines having 14
pin MS-type connector.
Magnum ® 350 Innershield Gun for LN-25 K126-2
For self-shielded wire with 15 ft. (4.5m) cable. For
.062-3/32” (1.6-2.8mm) wire.
Magnum ® 300 MIG Gun for LN-25 K1802-1
With 15 ft. (4.5m) cable. For .035”-.045” (0.9-1.2mm)
gas shielded (Includes Connector Kit).
LN-25 Ironworker™ K2614-9
• Maxtrac ® Wire Drive System
• Dual Range Wire Feed Speed
• Trigger Interlock Switch
• Replaceable and Flame Resistant Case
• Potted PC Boards
LN-23P Adapter Kit K350-1
Required to adapt LN-23P to any Lincoln power
source. Makes 14 pin connection at power source.
K126™ PRO Innershield ® 350A FCAW-SS 15 ft 1/16-
5/64 K126-12
• Replaceable liner system.
• Magnum ® PRO Copper Plus™ Contact Tips.
• Replaceable contact tip holder. - Easily replaced
without damage to the gun tube if the tip seizes or
fuses.
• Integrated trigger leads in coaxial cable rather than
externally routed.
• Improves protection against abrasion.
Drive Roll Kit .068 in (1.7 mm) Cored Wire KP1697-
068
• Drive Roll and Guide Tube Kit for feeding .068 in
(1.8 mm) cored wire.
Magnum ® PRO 350 Ready-Pak 15 ft 035-5/64
K2652-2-10-45
• All Guns Rated at 100% Duty Cycle.
• Industrial Grade Construction.
• Patent-pending Anti-Seize™ tip and diffuser thread
design reduces tip and diffuser seizing.
• Lincoln Copper Plus™ Contact Tips - Improves heat
dissipation to increase tip life.
• Comfort Grip™ Design - Barrel-style handle is light-
weight and balanced, providing a comfortable grip.
Drive Roll Kit Combination .035 in / .045 in Solid
Wire KP1696-1
• Drive Roll and Guide Tube Kit for feeding .035 in
(0.9 mm) or .045 in (1.1 mm)solid wire.
Magnum Spool Gun K487-25
Hand held semiautomatic wire feeder requires SG
Control Module. 25 ft. length.
SG Control Module K488 (For Magnum Spool Gun)
The interface between the power source and the
spool gun. Provides control of wire speed and gas
flow.
Input Cable K691-10 ( For SG Control Module)
For Lincoln engine drives with 14-pin MS-type con-
nection, separate 115V NEMA receptacle and output
stud connections. 10 ft. length.
CLASSIC ® 300D PERKINS